Netsys VDSL2 CO Modem Router Point to Point Solution (NV-600L)

Κωδικός e-Wireless: 1157.002

NV-600 is a VDSL2 router equipped with four 10/100 Ethernet ports. It is compliant to ITU-T G.993.2 standard and supports VDSL2 30a profile that features 100Mbps of symmetric data and it is perfectly suitable for triple-play applications. NV-600 is a cost effective solution that delivers high-speed Internet access to end-users over existing copper wire infrastructure and is designed to meet the requirements of ISPs and carriers that intend to cover end users in different loop range areas.

Flexible Configuration

The NV-600L support two modes, one is Bridge mode, another is Router mode. Bridge mode is easy to install, and features a variety of packet can be directly pass through. Router mode is a router which networking device that forwards data packets between computer networks. Routers perform the "traffic directing" functions on the Internet. A data packet is typically forwarded from one router to another through the networks that constitute the internet work until it reaches its destination node.

Interleave Delay Support

Interleave delay function is used in digital data transmission technology to protect the transmission against noise issue and data error.
If during transit more than a certain amount of data has been lost then the data cannot be correctly decoded. Short bursts of noise on the line can cause these data packets to become corrupt and the bridge has to re-request data which in turn can slow down the overall rate at which data is transmitted.
Interleaving is a method of taking data packets, chopping them up into smaller bits and then rearranging them so that
once contiguous data is now spaced further apart into a non continuous stream. Data packets are re-assembled by your lan extender.

LAN Distance Extension
The NV-600L/NV-600R acting as a standalone pair is good for Ethernet distance extension over existing telephone wires. With just one pair of AWG-24 copper wire, you can easily connect the maximum data rate of 100Mbps and up to 3km distance support. It is easy-to-use which do not requires installation of additional wiring. Every modular phone jack in the building can become a port on the LAN.